Job Information - Job #2130037452 Filled - Use Search for More Options (ID# 2130037452)

Responsibilities

Prepares surfaces to be painted by cleaning, masking and sanding

Applies chemical paint stripping solution with a spray gun or brush

Removes paint stripper using a pressure washer

Mix and apply primers/paints according to specifications as required

Apply topcoat

Placard installation using aircraft tech data

Stores, handles, uses and disposes of hazardous chemicals in accordance with Federal, State, and Local Environmental Protection Laws

Maintains a clean work environment for tooling and equipment

Stripe, registration, and logo layout and application from drawings and prints

Contractor Benefits/Incentive:

• $10,000 in bonuses for employees in good standing (call for details)
• Limited time paid housing for employees in good standing (call for details)
• Overtime available
• $100 travel pay on first check
• Health Insurance
• Holiday Pay
• Longevity Bonus
• 401K Programs

• Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics. Perform and document all work performed per appropriate manuals and regulations as required.
• Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
• Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner
• Remove / install aircraft components as required
• Fabricate and or modify structural modifications on aircraft part
• Perform minor structural repairs on composite components either attached or detached
• Assist in conducting hidden damage inspection of aircraft structures
• Assist with complex structural repairs either on or off aircraft
• Operate ground support equipment as required
• Assist with aircraft component repair
• Perform mechanical / electrical removals and installations as required
• May assist with maintenance at off-site locations
• Assist in wing removal as required
• Assist maintenance as required
•  Inspect confined areas of airframe
• Assist in designing, modifying and welding metal fixtures as required
•  Assist in providing time estimates as required
• Fabricate sheet and/or composite components

The A&P Technician troubleshoots, repairs, inspect sand performs maintenance on Customer aircraft. Performs and documents all work performed per appropriate manuals and regulations as required.

• Adhere to General Work Requirements
• Comply with Environmental / Health / Safety policies and procedures.
• Participate in 5-S activities
• Perform all work in a safe and timely manner
• Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
• Perform and document work performed per appropriate manuals and regulations as required
• Operate ground support equipment as required
• Perform mechanical / electrical removals and installations
• May assist with maintenance at off-site locations
• Assist in providing time estimates
• Assist in performing complex repairs on aircraft systems
• Perform other duties as assigned

Contractor Benefits/Incentive:

• $10,000 in bonuses for employees in good standing (call for details)
• Limited time paid housing for employees in good standing (call for details)
• Overtime available
• $100 travel pay on first check
• Health Insurance
• Holiday Pay
• Longevity Bonus
• 401K Programs

• Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics.
• Perform and document all work performed per appropriate manuals and regulations as required.
• Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
• Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner
• Remove / install aircraft components as required
• Fabricate and or modify structural modifications on aircraft part
• Perform minor structural repairs on composite components either attached or detached
• Assist in conducting hidden damage inspection of aircraft structures
• Assist with complex structural repairs either on or off aircraft
• Operate ground support equipment as required
• Assist with aircraft component repair
• Perform mechanical / electrical removals and installations as required
• May assist with maintenance at off-site locations
• Assist in wing removal as required
• Assist maintenance as required
• Inspect confined areas of airframe
• Assist in designing, modifying and welding metal fixtures as required
• Assist in providing time estimates as required
• Fabricate sheet and/or composite components

 The A&P Technician troubleshoots, repairs, inspect sand performs maintenance on Customer aircraft. Performs and documents all work performed per appropriate manuals and regulations as required.

• Adhere to General Work Requirements
• Comply with Environmental / Health / Safety policies and procedures.
• Participate in 5-S activities
• Perform all work in a safe and timely manner
• Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
• Perform and document work performed per appropriate manuals and regulations as required
• Operate ground support equipment as required
• Perform mechanical / electrical removals and installations
• May assist with maintenance at off-site locations
• Assist in providing time estimates
• Assist in performing complex repairs on aircraft systems
• Perform other duties as assigned
   

Your duties include:

• Maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty
• Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation
• Reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components
• Performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments
• Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction
• Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components
• Job duties require that this mechanic:
• Applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals
• Applies a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems
• Applies detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.
• Applies the experience and ability to provide technical support to structural/mechanical engineers and customers alike
• Performs preflight, thru-flight, and post-flight maintenance inspections
• Performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes
• Applies a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts
• Applies a broad knowledge of aircraft sheet metal/structural modifications and repair
• Applies thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.
• Be able to use a variety of manual hand tools such as crimpers, strippers, wire cutters, heat shrink gun, etc.
• Be able to read and interpret schematics, assembly drawings, process specifications, wiring diagrams, technical manuals, written instructions, etc.
• Make entries in aircraft logs and records, and is responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.

Skill: Cabinet Builder

Duration: 6+ months

Location: Indianapolis IN

Aircraft: VIP Corporate

Salary: please call for compensation details (800) 743-8988

Job Description:

• Fabricate high quality cabinetry, devan, ledges etc and other wood-surfaced subassemblies.
• Interpret material specs and engineering drawings to ensure finished product meets the design spec, with a high level of quality and detail.
• Request material needs timely to ensure a continuous work flow.
• Follows all department safety guidelines and ensure proper usage of tools and equipment.
• Other duties as assigned but not covered herein.

Performs avionics and electrical systems maintenance according to FCC, FAA and Company Policies and Regulations. Troubleshoots, tests, repairs and installs avionics components such as aircraft communication, navigation, radar and electronic instrument systems. Operates and maintains test equipment and trade associated tools.

JOB RESPONSIBILITIES

• Performs routine or special maintenance inspections to prevent failure of aircraft electrical and avionic systems and components; performs complete operational and functional checks on navigation, communication and flight control systems, including instrumentation and pilot static installations, etc.  Fabricates wiring harnesses, installs/modifies avionic and electrical systems.
• Determines when a component should be repaired or replaced; decides upon necessary repair scheme and quantity and type of parts needed to accomplish proper repair; secures same from Stores or departmental supplies.
• Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
• Inspects completed work before sign off to identify any needed rework and performs rework; ensures that repaired components meet prescribed standards and tolerances.
• Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
• Completes work package documentation by signing/stamping off after finishing all designated operations.
• Performs installation of digital avionic equipment.
• Interprets avionic/electrical wiring diagrams, wire identification, harness fabrication, wiring and cable integrity, coax cables and fittings and connector assemblies.
• Adjusts, repairs, or replaces malfunctioning components or assemblies, using hand tools and soldering iron.
• Installs electrical and electronic components, assemblies, and systems in aircraft, using hand tools, power tools, and soldering iron.
• Interprets flight test data to diagnose malfunctions and systemic performance problems.
• Sets up and operates ground support and test equipment to perform functional flight test of electrical and electronic systems.
• Tests components or assemblies, using circuit tester, oscilloscope, and voltmeter.
• Trouble shoots, repairs, reworks, and modifies worn or defective assemblies, components or systems.

Skill: Aircraft Painter

Duration: Long term

Location: Sandpoint, ID

Aircraft: Kodiak -General Aviation

Salary: please call Strom Aviation for compensation details (800) 743-8988  

Description of Responsibilites:

• Mix primers and paints per the manufacturer’s recommendations.
• Read and interpret job travelers, prints, and other instructions to prime and/or paint parts to meet Type Design requirements
• Clean and maintain spray guns, work benches, and other equipment associated with the paint booth.

Fabricate, assemble, install, and repair sheet metal parts by using products and processes which are varied but generally not complex in scope.

Must read and interpret blueprints, drawings, manuals, specifications sketches, job orders, planning documents and engineering drawings. Determines equipment requirements and the method and sequences of operation to be followed in fabrication of parts using materials such as graphite, fiberglass, plastic, epoxy resins, rubber and like materials.

Paint removal, metal forming, fastener use, disassembly/reassembly of mechanical components.

Corrosion removal and surface treatment.

Selects tooling and materials compatible with the processing techniques identified in the work instructions and documentation of repairs

Seeking A&P mechanics in Macon, GA

• Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
• Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
• Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
• Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
• Consults the Maintenance Lead if technical assistance is needed during the repair process.
• Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
• Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
• Completes work package documentation by signing/stamping after finishing all designated operations.
• Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
• Provides supervisor with performance statistics and other operational data, as requested.
• Properly accounts for time and materials used in all inspection and maintenance activities.
• Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.

Performs functions in a specific area of the production line, such as, assembling, fastening and installing parts on or for the aircraft.

Essential Duties and Responsibilities (other duties may be assigned):

• Familiarization with the use of hand and power tools.
• Must be able, or be trainable, to competently install solid rivets commonly used in the construction of aircraft and aircraft assemblies.
• Experience with blueprint reading preferred.
• Must be able to apply common sense understanding, carry out instructions, and demonstrate good analytical skills, alphanumeric accuracy and reading comprehension.
• Ability to demonstrate high attention to detail and the ability to work quickly and thoroughly in a production environment.
• Must be an excellent team player, be dependable, trustworthy and present self with professionalism.
• The right individual will be teachable and willing to learn.

Seeking A/P Mechanics in Nashville, TN -- Work will be performed on Regional Aircraft. 

• Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer's specifications.
• Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
• Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
• Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
• Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
• Consults the Maintenance Lead if technical assistance is needed during the repair process.
• Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
• Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
• Completes work package documentation by signing/stamping after finishing all designated operations.
• Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
• Provides supervisor with performance statistics and other operational data, as requested.
• Properly accounts for time and materials used in all inspection and maintenance activities.
• Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.
   

Seeking A&P mechanics in Macon, GA

• Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
• Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
• Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
• Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
• Consults the Maintenance Lead if technical assistance is needed during the repair process.
• Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
• Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
• Completes work package documentation by signing/stamping after finishing all designated operations.
• Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
• Provides supervisor with performance statistics and other operational data, as requested.
• Properly accounts for time and materials used in all inspection and maintenance activities.
• Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.